|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MC13-SERIES Features (1) 2 mounting options : MC13** Screw mounting type MC13**DIN Din rail mounting type (2) Worldwide compliance : Voltage rating 3 phase AC500V, 10, 20, 30A (3) Safe design : Terminal with cover, Low leakage current (4) Environmental compliance : Lead free soldering Safety standard UL1283 CSA Std. C22. 2 No. 8 EN133200 EN133200 Specifications Model STD type Items DIN type 1 Rated Voltage (AC) 2 Rated Current (*1) 3 Test Voltage (terminals to base plate, 1min AC) 4 Isolation Resistance (terminals to base plate, 500VDC) 5 Leakage Current 500V,60Hz 6 DC Resistance (three lines) 7 Temperature Rise 8 Operating Temperature 9 Operating Humidity 10 Storage Temperature 11 Storage Humidity 12 13 Vibration Weight MC13** MC13**DIN MC1310 MC1320 MC1330 MC1310DIN MC1320DIN MC1330DIN 500V (50/60Hz) 6A 10A 20A 30A 2000V (100mA) at 25C, 70% RH 100M min at 25C, 70% RH 5.0mA max 90m max 68m max 23m max 11m max 30C max -25C ~ +85C 30% ~ 95% RH (No Dewdrop) -40C ~ +85C 10% ~ 95% RH (No Dewdrop) At no operating 10~55~10Hz, Amplitude (Sweep for 1min) 0.825mm constant (Maximum 49.0m/s 2)X,Y,Z 1hour each At no operating 55~250~55Hz, Acceleration (Sweep for 1min) 19.6m/s 2, X,Y,Z 1hour each At no operating 10~55~10Hz, Acceleration (Sweep for 1min) 9.8m/s 2, X,Y,Z 1hour each 600g = (Note) : Value for Ta < 50C For Ta>50C derate according to the derating curve shown on the right. MC1306 MC1306DIN EMI Noise filter Circuit Derating Current (%) Temperature (C) Terminal Explanation Request customer specification for further details of specifications, outline, characteristics, etc. Read the instruction manual before usage. Contact us about delivery before ordering. 163 MC13-SERIES MC13** (Unit: mm) MC13**DIN EMI Noise filter (Unit: mm) MC13**DIN explanation *Mounting MC13**DIN could be mounted on 35mm wide (TS35 type) Din-rail.For mounting, put the part (A) of the unit over the top hat rail and push forward like (B), so that the rail stopper is firmly held on the Din-rail. For unmounting, put a screw driver int the part (C) and lift it up to remove the unit. *Ground Do not earth whth Din-rail. Earth directly from the ground terminal of MC13**DIN. 164 MC13-SERIES CHARACTERISTICS Attenuation Characteristic (typical) MC1306 MC1310 EMI Noise filter 165 MC13-SERIES CHARACTERISTICS Attenuation Characteristic (typical) MC1320 MC1330 EMI Noise filter 166 |
Price & Availability of MC1306 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |